7600-Es20-Ge; Cisco 7600 Ethernet Services Plus Line Cards - Cisco 7603 - Modular Expansion Base Installation Manual

Chapter 1 Product Overview

7600-ES20-GE

The Cisco 7600-ES20-GE line card has 21 LEDs, as shown in
Figure 1-32
7600-ES20-GE3CXL
ETHERNET
SERVICES MODULE
There is one line card STATUS LED and twenty A/L (Active Loopback) LEDs.
descriptions.
Table 1-22
LED Label
STATUS
A/L

Cisco 7600 Ethernet Services Plus Line Cards

The Cisco 7600 Series ES+ line cards are a multiple-fabric, fixed-port Ethernet line card for the Cisco
7600 series routers that are capable of 40 Gbps full-duplextraffic forwarding using a fixed port interface
design. The Cisco 7600 Series ES+ line card versions are:
•
•
•
•
The difference between the versions are the link interface daughter cards that accept small form-factor
pluggable (SFP or XFP) optical transceivers. Additionally, each of the versions has a common baseboard card
and a control processor daughter card.
The SFP and XFP modules allow the line cards to be configured for different media types (copper or fiber)
and different optical requirements (single mode fiber or multimode fiber) as available.
OL-5077-7
Cisco 7600-ES20-GE Line Card Faceplate
CLASS 1 LASER
Cisco 7600-ES20-GE Line Card LEDs
Color
Red
Green
Yellow
Off
Amber
Green
Green and
Amber
Off
2-port versions: Cisco 7600 ES+ 2TG3C, -3CXL Line Cards
4-port versions: Cisco 7600 ES+ 4TG3C, -4TG3CXL Line Cards
20-port versions: Cisco 7600 ES+ 20G3C, -20G3CXL Line Cards
40-port versions: Cisco 7600 ES+ 40G3C, -40G3CXL Line Cards
State Meaning
On The line card has encountered an error.
On The line card is online.
On The line card is loading.
Off The line card is powered off.
On The port is enabled but there is not a valid Ethernet
link.
On The port is enabled and a valid Ethernet link has been
established.
On Undefined condition.
Off The port is not enabled by software.
Cisco 7600 Ethernet Services Plus Line Cards
Figure 1-32.
Table 1-22
Book Title
provides LED
1-33