Oc-48 Dpt/Pos Osm; Channelized Oc-12 Osm - Cisco 7603 - Modular Expansion Base Installation Manual

Chapter 1 Product Overview
Figure 1-11
OSM-1OC48-POS-SS
1 PORT OC-48 POS SM SR

OC-48 DPT/POS OSM

Table 1-10
Table 1-10
OSM-20C48/1DPT-SI
The 2-port OC-48 DPT/POS OSMs
two-port OC-48c/STM-16 Packet-over-SONET (POS) module or as a one-port OC-48c/STM-16 DPT
module.
Figure 1-12
OSM-20C48/IDPT-SS
2 PORT OC48 POS/DPT SN SR

Channelized OC-12 OSM

Table 1-11
Table 1-11
OSM-1CHOC12/T1-SI
The CLI allows SDH framing and channel mappings although these configurations are not supported
Note
currently. Do not configure the channelized OC-12 modules for SDH framing.
The 1-port channelized OC-12 OSMs (see
OC-3 and DS3. The channelized OC-12 modules can be configured as multiple OC-3 or DS3
channelized interfaces, or a mix of OC-3, DS3, and DS3 subrate channelized interfaces. Each port uses
LC fiber connectors for use with SMF.
Figure 1-13
OL-5077-7
1-Port OC-48 POS OSM
lists the OC-48 Dynamic Port Transport(DPT)/POS OSMs.
2-Port OC-48 DPT/POS OSMs
OSM-20C48/1DPT-SL
(Figure
2-Port OC-48 DPT/POS OSM
lists the channelized OC-12 OSMs.
1-Port Channelized OC-12 OSMs
OSM-1CHOC12/T3-SI
1-Port Channelized OC-12 OSM
1-12) are configurable via software to be used either as a
Figure 1-13) support channelized configurations down to
Optical Services Modules
OSM-20C48/1DPT-SS
Book Title
1-19