Enhanced Flexwan Module (Ws-X6582-2Pa) - Cisco 7603 - Modular Expansion Base Installation Manual

Router module
Hide thumbs Also See for 7603 - Modular Expansion Base:
Table of Contents

Advertisement

Chapter 1
Product Overview
WAN consolidation and extend QoS and traffic management capabilities over WAN segments. The
FlexWAN module supports ATM and Packet over SONET (POS) OC-3 links and channelized,
multichannel, and clear channel port adapters at speeds from T1/E1 to T3/E3.
The STATUS LED on the FlexWAN module front panel (see
FlexWAN module and is described in
For information on FlexWAN module hardware and software requirements, supported and unsupported
features, and port adapter installation and configuration, refer to the Catalyst 6500 Series and Cisco
7600 Series Router FlexWAN Module Installation and Configuration Note.
Figure 1-21
FlexWAN Module Front Panel (WS-X6182-2PA)
STATUS LED

Enhanced FlexWAN Module (WS-X6582-2PA)

Note
The Enhanced FlexWAN module is fabric-enabled. When a Switch Fabric Module is installed in the
Cisco 7600 series router, and there is a mix of fabric-enabled and non-fabric-enabled (classic) modules
in the system, the central forwarding performance remains at 15 Mbps.
The MSFC2, in conjunction with the Enhanced FlexWAN module (WS-X6582-2PA), provides
multiprotocol routing support with full Internet route connectivity for speeds ranging from serial RS-232
to OC-3. The Enhanced FlexWAN module can accept up to two Cisco 7200 or Cisco 7500 WAN port
adapters, which deliver WAN consolidation and extend QoS and traffic management capabilities over
WAN segments. The Enhanced FlexWAN module supports ATM and Packet over SONET (POS) OC-3
links and channelized, multichannel, and clear channel port adapters at speeds from T1/E1 to T3/E3.
Note
To use the Enhanced FlexWAN module, you must have a Supervisor Engine 2 with an MSFC and PFC
or a Supervisor Engine 720.
The STATUS LED on the Enhanced FlexWAN module front panel (see
of the Enhanced FlexWAN module and is described in
For information on Enhanced FlexWAN module hardware and software requirements, supported and
unsupported features, and port adapter installation and configuration, refer to the Enhanced FlexWAN
Module, Fabric Enabled Installation and Configuration Note.
OL-5077-7
Figure
Table 1-17 on page
1-29.
Table 1-17 on page
Catalyst 6500 Family Modules
1-21) indicates the status of the
Figure
1-22) indicates the status
1-29.
Book Title
1-25

Advertisement

Table of Contents
loading

Table of Contents