48-Port 10/100Tx Switching Module (Ws-X6348-Rj-45); 16-Port Gigabit Ethernet Switching Module (Ws-X6516-Gbic) - Cisco 7603 - Modular Expansion Base Installation Manual

Router module
Hide thumbs Also See for 7603 - Modular Expansion Base:
Table of Contents

Advertisement

Catalyst 6500 Family Modules
Figure 1-22
Enhanced FlexWAN Module Front Panel (WS-X6582-2PA)
STATUS LED

48-Port 10/100TX Switching Module (WS-X6348-RJ-45)

The 48-port 10/100TX switching module (WS-X6348-RJ-45), shown in
switched, 10/100-Mbps autosensing, full- or half-duplex ports. Ports have RJ-45 connectors for either
Category 3 or Category 5 unshielded twisted-pair (UTP) cables.
Figure 1-23

48-Port 10/100TX Switching Module (WS-X6348-RJ-45)

WS-X6348-RJ-45
The front-panel LEDs provide status information for the module and the individual port connections.
The LEDs are described in

16-Port Gigabit Ethernet Switching Module (WS-X6516-GBIC)

The 16-port Gigabit Ethernet switching module (WS-X6516-GBIC), shown in
switched, full-duplex Gigabit Ethernet ports that you can configure with any combination of
1000BASE-SX, LX/LH, and ZX GBICs. Ports have SC connectors for multi-mode fibre (MMF) and
single-mode fiber (SMF). The WS-X6516-GBIC module has enhanced QoS features.
You can have a maximum of 12 1000BASE-ZX GBICs per system to comply with EN55022 Class B
Note
regulations and 24 1000BASE-ZX GBICs per system to comply with FCC Class A regulations.
Figure 1-24

16-Port Gigabit Ethernet Switching Module (WS-X6516-GBIC)

WS-X6516-GBIC
16 PORT GIGABIT ETHERNET
The front-panel LEDs provide status information for the module and the individual port connections.
The LEDs are described in
Book Title
1-26
STATUS
48 PORT
10/100 BASE-T
Table 1-17 on page
1
3
5
2
4
6
1
2
3
4
5
6
Table 1-17 on page
ETHERNET SWITCHING
MODULE
1-29.
7
9
11
8
10
12
7
8
9
10
11
12
1-29.
Chapter 1
Figure
1-23, provides 48
PHONE
Figure
1-24, provides 16
13
15
14
16
13
14
15
16
Product Overview
OL-5077-7

Advertisement

Table of Contents
loading

Table of Contents