Device Level Ring (Dlr) Function - NSD ABSOCODER NCW-3DNIPMP Specifications & Instruction Manual

9-10. Device Level Ring (DLR) Function

NCW-3DNIP can be used as a ring node for device level ring (DLR) function.
All ring nodes on the network must support DLR function when using this function.
All settings of DLR function are done by "Supervisor node". NCW-3DNIP doesn't need any setting.
Refer to the "Supervisor node manual in-use" for the network setting and operation methods with using DLR
function.
The device level ring (DLR) function was supported after version 2.01.
Products with the software version mark put on the products panel after " B " support.
Refer to "8-1." for the version mark.
73