Parameters Setting Procedure - NSD ABSOCODER NCW-3DNIPMP Specifications & Instruction Manual

9-7-2. Parameters Setting Procedure

Use the RSNetWorx software to set parameters.
NCW-3DNIP (after the version 2.01) can set parameters by using the web server function.
Products with the software version mark put on the products panel after " B " support this function.
Refer to "8-1." for the version mark
(Refer to "APPENDIX 3" for the web server function.)
In this section, setting procedures of the parameters are described below.
(1) Start RSNetWorx software
(2) Go online
Click "Online"
(2)
60