Viewing The Device; Ports Description; Front Panel - D-Link xStack DES-3228PA Web/Installation Manual

Section 1. Device Description
This section contains a description of the D-Link DES-3228PA and contains the following topics:
•

Viewing the Device

•

Ports Description

•
Cable Specifications
•
LED Definitions
•
Cable, Port, and Pinout Information
•
Physical Dimensions
Viewing the Device
The device described in this section is a stackable Fast Ethernet Managed Switch. Device management is
performed using an Embedded Web Server (EWS) or through a Command Line Interface (CLI). The device
configuration is performed via RS-232 interface.
This section contains descriptions for the following:
•

Front Panel

•
Back Panel
Front Panel
DES-3228PA is a high-performance Fast Ethernet switch that provides 24-Port 10/100Mbps + 2 Combo Copper/
SFP (100BASE-FX/1000BASE-X Fiber ports) + 2 1000 Mbps Copper stacking ports.
The following figure illustrates the DES-3228PA front panel.
Figure 1: DES-3228PA Front Panel
The device front panel is configured as follows:
•
24 10/100Base-T ports — RJ-45 TX auto-sensing switching ports. The RJ-45 ports are designated as ports
Ports 1-24.
•
RS-232 Console port — An asynchronous serial console port supporting the RS-232 electrical specification.
The port is used to connect the device to the console managing the device.
•
2 SFP 100BASE-FX/1000BASE-X Fiber ports — There are two T/SFP ports designated as ports Ports 25
and 26, which are also Combo ports.
Page 8
Device Description
Viewing the Device