Table of Contents
Advertisement
Configuring LACP
LAG ports can contain different media types if the ports are operating at the same speed. Aggregated links can be
set up manually or automatically established by enabling LACP on the relevant links. Aggregate ports can be
linked into link-aggregation port-groups. Each group is comprised of ports with the same speed. The LACP
Parameters Page contains fields for configuring LACP LAGs. To configure LACP for LAGs:
1.
Click Advanced Setup > Interface > LACP Parameters. The LACP Parameters Page opens:
Figure 35: LACP Parameters Page
The LACP Parameters Page contains the following fields:
•
LACP System Priority — Specifies system priority value. The field range is 1-65535. The field default is 1.
•
Unit No. — Displays the stacking member unit number.
•
Port — Displays the port number to which timeout and priority values are assigned.
•
Port-Priority — Displays the LACP priority value for the port. The field range is 1-65535.
•
LACP Timeout — Displays the administrative LACP timeout.
2.
Click
. The LACP Parameters Settings Page opens:
Page 76
Aggregating Ports
Configuring LACP
Advertisement
Table of Contents
