Table of Contents
Advertisement
DES-3228PA Embedded Web System User Guide
Section 5. Managing Device Information
This section contains information for setting general system information, and includes the following sections:
•
Defining the System Description
•
Configuring System Time
Defining the System Description
The System Description Page contains parameters for configuring general device information, including the sys-
tem name, location, and contact, the system MAC Address, System Object ID, System Up Time, System IP and
MAC addresses, and both software and hardware versions. To define the general system information:
1.
Click System > General > Description. The System Description Page opens:
Figure 19: System Description Page
The System Description Page contains the following fields:
•
Model Name — Displays the device model number and name.
•
System Name — Defines the user-defined device name. The field range is 0-160 characters.
•
System Location — Defines the location where the system is currently running. The field range is 0-160
characters.
•
System Contact — Defines the name of the contact person. The field range is 0-160 characters.
•
System Object ID — Displays the vendor's authoritative identification of the network management sub-
system contained in the entity.
•
System Up Time — Displays the amount of time since the most recent device reset. The system time is dis-
played in the following format: Days, Hours, Minutes, and Seconds. For example, 41 days, 2 hours, 22 min-
utes and 15 seconds.
Page 47
Advertisement
Table of Contents
