Downloading System Files - D-Link xStack DES-3228PA Web/Installation Manual

Layer 2 stackable 10/100mbps ethernet switch with poe
Hide thumbs Also See for xStack DES-3228PA:
Table of Contents

Advertisement

Downloading System Files

The File Download page contains parameters for downloading system files. To download system files:
1.
Click System > File Management > File Download. The File Download Page opens:
Figure 100:File Download Page
The
File Download Page is divided into sections based on the following system file types:
Firmware Download - Contains the device software.
Configuration Download - Contains the user-defined device configuration.
The firmware files manage the device and the configuration files configure the device for transmissions. Only one
type of download can be performed at any given time.
Firmware Download
The Firmware Download section contains the following fields:
Firmware Download — Indicates that the download is for firmware. If Firmware Download is selected, the
Configuration Download fields are grayed out.
TFTP Server IP Address — Specifies the TFTP Server IP Address from which files are downloaded.
Source File Name — Specifies the file to be downloaded.
Destination File — Specifies the destination file type to which to the file is downloaded. The possible field
values are:
Software Image — Downloads the Image file.
Boot Code — Downloads the Boot file.
Page 162
Managing System Files
Downloading System Files

Advertisement

Table of Contents
loading

Table of Contents