Table of Contents
Advertisement
DES-3228PA Embedded Web System User Guide
Viewing RMON Statistics
The RMON Statistics Page contains fields for viewing information about device utilization and errors that occurred
on the device. To view RMON statistics:
1.
Click Advanced Setup > RMON > Statistics. The RMON Statistics Page opens.
Figure 143:RMON Statistics Page
The RMON Statistics Page contains the following fields:
•
Interface — Indicates the device for which statistics are displayed. The possible field values are:
–
Port — Defines the specific port for which RMON statistics are displayed.
–
LAG — Defines the specific LAG for which RMON statistics are displayed.
•
Refresh Rate — Defines the amount of time that passes before the interface statistics are refreshed. The
possible field values are:
–
15 Sec — Indicates that the RMON statistics are refreshed every 15 seconds.
–
30 Sec — Indicates that the RMON statistics are refreshed every 30 seconds.
–
60 Sec — Indicates that the RMON statistics are refreshed every 60 seconds.
•
Drop Events — Displays the number of dropped events that have occurred on the interface since the device
was last refreshed.
•
Received Bytes (Octets) — Displays the number of octets received on the interface since the device was
last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.
•
Received Packets — Displays the number of packets received on the interface, including bad packets,
Multicast and broadcast packets, since the device was last refreshed.
Page 217
Advertisement
Table of Contents
