Table of Contents
Advertisement
Defining Static Forwarding Database Entries
The Forwarding Database Static Addresses Page contains parameters for defining the age interval on the device.
To prevent static MAC addresses from being deleted when the device is reset, ensure that the port attached to the
MAC address is locked.
To configure the static forwarding database:
1.
Click Advanced Setup > Forwarding Database > Static Addresses. The Forwarding Database Static
Addresses Page opens.
Figure 44: Forwarding Database Static Addresses Page
The Forwarding Database Static Addresses Page contains the following fields:
•
MAC Address — Displays the MAC address to which the entry refers.
•
VLAN ID — Displays the VLAN ID number to which the entry refers.
•
Interface — Displays the interface to which the entry refers:
–
Port — The specific port number to which the forwarding database parameters refer.
–
LAG — The specific LAG number to which the forwarding database parameters refer.
•
Status — Displays how the entry was created. The possible field values are:
–
Secure — The MAC Address is defined for locked ports.
–
Permanent — The MAC address is permanent.
–
Delete on Reset — The MAC address is deleted when the device is reset.
–
Delete on Timeout — The MAC address is deleted when a timeout occurs.
•
Remove — Removes the entry. The possible field values are:
–
Checked — Removes the selected entry.
–
Unchecked — Maintains the current static forwarding database.
Note
To prevent static MAC addresses from being deleted when the device is reset, make sure that the port
attached to the MAC address is locked.
Defining the Forwarding Database
Defining Static Forwarding Database Entries
Page 86
Advertisement
Table of Contents
