Using The Installation Guide; Using The Embedded Web Interface User Guide - D-Link xStack DES-3228PA Web/Installation Manual

Layer 2 stackable 10/100mbps ethernet switch with poe
Hide thumbs Also See for xStack DES-3228PA:
Table of Contents

Advertisement

DES-3228PA User Guide Overview
This user guide is divided into the following sections to provide concise information for installing, configuring, and
managing the device:

Using the Installation Guide

Using the Embedded Web Interface User Guide

Using the Installation Guide
This section provides an overview of the D-Link DES-3228PA Installation Guide, which includes the following sec-
tions:
Section 1. Device Description — Provides a system description including the hardware components.
Section 2. Mounting Device — Provides step-by-step instructions for installing the device.
Section 3. Initial Configuration — Provides step-by-step instructions for the initial device configuration.
Using the Embedded Web Interface User Guide
This section provides an overview to the D-Link Web System Interface User Guide. The D-Link Web System Inter-
face User Guide provides the following sections:
Section 4. Getting Started — Provides information about using the EWS, including The D-Link Embedded
Web Interface interface, management, and information buttons, as well as information about adding, modify-
ing, and deleting device information.
Section 5. Managing Device Information —Provides information about opening the device zoom view,
defining general system information, and enabling Jumbo frames.
Section 6. Managing Stacking — Provides information about managing stacking.
Section 7. Configuring Ports — Provides information about configuring ports.
Section 8. Aggregating Ports — Provides information about configuring Link Aggregated Groups and
LACP.
Section 9. Configuring VLANs — Provides information about configuring and managing VLANs, including
information about GARP and GVRP, and defining VLAN groups.
Section 10. Defining the Forwarding Database — Provides information about configuring and managing
both static and dynamic MAC addresses.
Section 11. Configuring Spanning Tree — Provides information about configuring Spanning Tree Protocol
and the Rapid Spanning Tree Protocol.
Section 12. Configuring Device Security — Provides information about configuring device security for
management security, traffic control, and network security.
Section 13. Configuring IP Information — Provides information about defining device IP addresses, ARP,
and Domain Name Servers.
Section 14. Configuring Multicast Forwarding — Provides information about Multicast Forwarding.
Section 15. Managing Power over Ethernet Devices — Provides information about managing PoE.
Section 16. Managing System Files — Provides information about downloading, uploading, and copying
system files.
Section 17. Configuring Quality of Service — Provides information about configuring Quality of Ser-
vice on the device.
Section 18. Configuring SNMP — Provides information about defining SNMP v1,v2c, and v3 management,
including SNMP filters and notifications.
Section 19. Managing System Logs — Provides information about enabling and defining system logs.
Page 6
DES-3228PA User Guide Overview
Preface

Advertisement

Table of Contents
loading

Table of Contents