DES-3228PA Embedded Web System User Guide
–
Checked — Removes the selected ARP entries.
2.
Unchecked — Maintains the current ARP entries. Define the ARP Entry Age Out and Clear ARP Table
Entries fields.
3.
Click
. The ARP parameters are defined, and the device is updated.
To create a new ARP entry:
1.
Click Basic Setup > IP Configuration > IP Addressing > ARP. The ARP Page opens.
2.
Click
. The Add ARP Settings Page opens:
Figure 91: Add ARP Settings Page
3.
Define the Interface, IP Address, and MAC Address fields.
4.
Click
. The ARP interface is added, and the device is updated.
Page 147