DES-3228PA Embedded Web System User Guide
Configuring Stacking
The Stack Page allows network managers to either reset the entire stack or a specific device. To ensure that
device configuration changes are saved to the device, save the Start Up configuration file before resetting the
device. For more information on how to saving the device configuration, see Managing System Files. If the Stack-
ing Master is reset, the entire stack is reset. To open the Stack Page
•
Click System > General > Stack tab.
Figure 30: Stack Page
Stack Page contains the following fields:
The
•
Switch Stack Control from Unit 1 to Unit 2 — Switches the stack control from the Stack Master to the
Backup Master. The possible field values are:
–
Unit 1— Enables switching the stack control to the Standby Stack Master.
–
Unit 2— Maintains the current stacking control.
•
Unit No. — Displays the stacking unit number.
•
Unit No. After Reset — Displays stacking unit's stacking position after the device is reset.Switching Between
Stack Masters:
Stack Page
1.
Open the
2.
Check the Switch Stack Control from Unit 1 to Unit 2 checkbox.
3.
Click
. A confirmation message displays.
The Stack Page opens.
.
Page 69