Configuring Dhcp - D-Link xStack DES-3228PA Web/Installation Manual

Configuring DHCP

The Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on a network. DHCP
ensures that network devices can have a different IP address every time the device connects to the network. To
define a DHCP Interface:
1. Click Basic Setup > IP Configuration > IP Addressing > DHCP. The DHCP Page opens:
Figure 88: DHCP Page
The DHCP Page contains the following fields:
•
Interface — Displays
•
Host Name — Displays the system Host Name.
•
Remove — Removes DHCP interfaces. The possible field values are:
–
Checked — Removes the selected DHCP interface.
–
Unchecked — Maintains the DHCP interfaces.
2. Click . The Add DHCP IP Interface Page opens:
the IP address of the interface which is connected to the DHCP server.
Page 144
Configuring IP Information