Downloading System Files - D-Link DXS-3250 Web/Installation Manual

Downloading System Files

There are two types of files, firmware files and configuration files. The firmware files manage the device, and the
configuration files configure the device for transmissions. Only one type of download can be performed at any one
time.
The
File Download Page is divided into the following sections:
•
Firmware Download
•
Configuration Download
Firmware Download
The Firmware Download section contains the following fields:
•
Firmware Download — Indicates that the download is for firmware. If Firmware Download is selected, the
Configuration Download fields are grayed out.
•
TFTP Server IP Address — Specifies the TFTP Server IP Address from which files are downloaded.
•
Source File Name — Specifies the file to be downloaded.
•
Destination File — Specifies the destination file type to which to the file is downloaded. The possible field
values are:
–
Software Image — Downloads the Image file.
–
Boot Code — Downloads the Boot file.
•
Download to Master Only — Downloads the system file only to the Master
•
Download to All Units — Downloads the system file to all units
Configuration Download
The Configuration Download section contains the following fields:
•
Configuration Download — Indicates that the download is for configuration files. If Configuration Download
is selected, the Firmware Download fields are grayed out.
•
TFTP Server IP Address — Specifies the TFTP Server IP Address from which the configuration files are
downloaded.
•
Source File Name — Specifies the configuration files to be downloaded.
•
Destination File — Specifies the destination file to which to the configuration file is downloaded. The possi-
ble field values are:
–
Running Configuration — Downloads commands into the Running Configuration file.
–
Startup Configuration — Downloads the Startup Configuration file, and overwrites the old Startup
Configuration file.
Page 176
Managing System Files
Downloading System Files