TRENDnet TE100-P11 User Manual page 84

Problem No. 4 Using Windows 2000/XP/Vista, I installed the printer using LPD as
recommended, but I can't print.
•
Solution No. 4
•
1. Open the Printers folder.
2. Right-click on the Printer, and select Properties.
3. Select the Ports tab.
4. Uncheck the Enable bidirectional support checkbox.
Problem No. 5 When printing from some software applications such as Power
Point, it takes a long time and the print out is incorrect.
Solution No. 5 The problem is due to the printer, which is being configured to Start
printing after the first page is spooled. To change this setting:
•
•
•
•
Problem No. 6 The Configuration button on the Printer Status screen in BiAdmin is
grayed out, even though my printer is bi-directional.
Solution No. 6 The button is unavailable if the printer is busy. You must wait until the
printer is idle.
Check that the correct Printer driver is being used.
Try disabling the Bidirectional printing support, as follows:
Go to Control Panel - Printers and click on your printer.
Then select File - Properties - Details.
When the Details screen appears, click the Spool Settings button.
When the Spool Settings dialogue box appears, choose Start
printing after last page is spooled and click OK.
Page 81