3. After the printer port created, the following screen will be displayed. Select the printer
from Existing Printers list, then click Connect.
If the correct printer type is not listed, click "Add New Printer" to run the Windows Add
Printer wizard. Step through the Wizard and install the required printer:
•
Select the correct Printer Manufacturer and Model, or use the "Have Disk" option if
appropriate.
•
We recommend changing the Printer name to indicate which device is on.
(e.g. HP5600 on TN003751_P2)
•
If prompted about sharing the printer, do NOT enable Sharing.
•
When the Printer installation is finished, it will be listed in the Configure Printer Port
screen above. Select it and click Connect.
4. The next screen will pop up.
If you see the following error message, either install Internet
Explorer 4 or later, or follow the procedure in the "Trouble
Shooting - Windows" section of Chapter 8.
Page 27