Table of Contents Table of Contents English ...................... 1. Before You Start ................. 2. How to Connect ................. 3. Configure the Print Server ..............4. Add the Network Printer to your PC ........... Troubleshooting ..................Version 03.24.06...
System Requirements CD-ROM Drive CPU: Intel Pentium 100Mhz or above Memory: 8MB or above Windows 2003/XP/2000/ME/98SE, Unixware, Linux, Mac OS X Application 10/100Mbps Parallel Print Server (TE100-P1P) Cable/DSL 4-Port Internet Broadband Router (TW100-S4W1CA) Cable/DSL Modem Workstations with Fast Ethernet Adapter...
2. How to Connect Note: Please power off all printers before connecting them to the print server. 1. Connect the Print Server’s Parallel Port directly to the Parallel Port of the printer. 2. Connect a RJ-45 network cable from a Switch/Router to the LAN port of the Print Server.
3. Configure the Print Server Note: The Print Server can be managed using the PS-Utility or a web browser. For Mac Users, change your computers IP address to 192.168.0.X (where X is an available number from 2-254), and enter 192.168.0.1 in your web browser to access the Print Server's Web Utility.
Page 6
4. Click Show Web Setup. 5. Write down the Server Name and t Port Name. Print Server configuration is now complete. English...
4. Add the Network Printer to your PC Note: For TCP/IP Printing instructions, please consult the User’s Guide included on the Utility CD-ROM. Windows 2000/XP 1. Go into the Control Panel and double-click the Printers and Faxes icon. Click Add Printer and then click Next.
Page 8
Add Network Printer is now complete. For detailed information regarding the TE100-P1P configuration and advanced settings, please refer to the User's Guide included on the Utility CD-ROM or TRENDnet's website at www.trendnet.com...
Open PS-Utility v3.00 (See 3. Configure the Print Server) to locate your print server's IP Address. For Mac users, press the Reset button at the back of the TE100-P1P, hold the button for 15 seconds, release the button, and enter http://192.168.0.1...
Need help?
Do you have a question about the TE100-P1P and is the answer not in the manual?
Questions and answers