TRENDnet TE100-P11 User Manual page 45

InitDevice – Reset Device
This will cause the device to reboot. This should be done after making any configuration
changes, or if the device stops responding after some problems.
InitDevice – Restore to Factory Default
This will restore ALL device values to their factory defaults. To restore only the current screen,
use the Set to Default button on the screen.
InitDevice – Attached Remote
This is used to connect to a Print Server device on another LAN segment. You need to know
the IP address of the remote Print Server.
If your LAN does not have a Router, you can ignore this option.
InitDevice – Connected Protocol
This option allows you to designate which LAN protocol will be used for communication
between the selected device and this application. You should only select ONE protocol.
Diagnostics – Print Test Page
Use this option to print a test sheet from the selected Print Server port. The test page will
include status information.
Help – Help Topics
Use this option to search the question you might have.
Help – About Bi-Admin
Use this option to check the utility version and copyright information.
Page 42