TCP/IP
IP Address
DHCP Client
Fixed IP
Address
Device IP
Address
Subnet Mask
Gateway
Address
Connection
Delay before
reconnection
attempts
Number of
reconnection
attempts
Select this if your LAN has a DHCP Server.
The Print Server will then automatically obtain an IP address from the
DHCP Server.
Select this to assign a fixed IP address to the Print Server. If selected,
you must enter a in the Device IP Address, Subnet Mask, and
Gateway.
IP Address assigned to the Print Server.
Enter an unused IP address from the address range used on your
LAN.
Use the same values as PCs on your LAN (or on the same LAN
segment, if you have a Router).
Use the same values as PCs on your LAN (or on the same LAN
segment, if you have a Router).
Sets how long the Print Server should wait before retrying a TCP/IP
connection which is lost. Allowable values are from 0 to 255 seconds,
with 2 as the default.
Set how many attempts at reconnection will be made. After that, the
TCP/IP session will be terminated.
Allowable values are from 0 to 255, with 254 as the default.
Page 59