TRENDnet TE100-P11 User Manual page 27

5. On this screen, select Custom, and click the Settings button.
Enable
6. On the Port Settings screen, shown above:
•
Select LPR in the Protocol section
•
Enter a Queue name (L1 for Parallel Port, L2 for USB Port)
•
Ensure the LPR Byte Counting Enabled setting is Enabled.
•
Click OK to confirm your changes and close this screen.
7. Follow the prompts to complete the Wizard.
LPR
L1 (Parallel Port)
L2 (USB Port)
Page 24