Wireless Link Info Screen (TEW-P11G only)
After clicking the "Link Info" button on the Wireless Screen, a screen like the example below
will be shown.
State
Current Channel
Current TX Rate
Throughput ( Tx )
Throughput ( Rx )
Link Quality
Signal Strength
This indicates which access point is currently in use.
The current channel which has been used.
The current transmitting speed.
This will show how much data has been transmitted per second.
This will show how much data has been received per second.
This indicates the quality of the Wireless connection
This indicates the strength of the Wireless signal being received.
The "Link Quality" and "Signal Strength" data is not
available if using "Ad-hoc" mode.
Page 53