24. Click close to finish your Installation. Your installation is now completed.
•
To install additional Printers, repeat steps 12.
•
Use the Start menu to run this program in future. The default installation is Start >
Programs >TRENDnet > Print Server Utility > Printer Port Setup.
Note: If the desired Print Server is not listed:
•
Check all cables to the Print Server.
•
Check the Print Server's LEDs:
•
The Power LED should be On in Green.
•
If using the LAN interface, the Ethernet LED should be On.
•
If using the Wireless interface, the Wireless LED should be On.
•
Check that your PC and the Print Server are on the same LAN segment. (If you don't have
a Router or Gateway on your LAN, you only have 1 segment.)
•
Check that your PC has either the TCP/IP or NetBEUI network protocols installed. See in
Chapter 4 for details.
Page 18