TRENDnet TE100-P11 User Manual page 70

IPP Client Setup - Windows 98/ME
For these platforms, IPP Client software is supplied on the CD-ROM.
Also you can distribute the setup program (IPP_CLIENT.EXE) to users vial E-mail.
Installing from Autorun
1. Insert the CD-ROM in your drive. If the program does not start automatically, run the
autorun.exe in the root folder.
2. Click Install Utility, then click the submenu Installation
3. Click Next on Welcome screen
4. Click 4. IPP (Internet Printing Protocol) Client
5. Following the screen to finish the installation.
Installing using IPP_CLIENT.EXE
1. Insert the CD-ROM into your CD-ROM drive. Click Exit when the Autorun screen shows
up.
2. Go to Start > Run, Browse the Print Server's CD-ROM
3. Select the IPP folder, the click "IPP Client.exe" file, then click OK.
4. The IPP Setup program will then run.
5. Follow the prompts to complete the installation.
IPP Client Configuration
1. Run the "Add IPP Port" program entry created by the installation. A screen like the
following will be displayed.
Page 67