Wireless Tab - WEP Encryption (TEW-P11G only)
This tab will be displayed if the selected device has the capability to serve as a Wireless
Stations for your LAN.
Change the settings to suit your environment. Generally, you must match the settings of other
'Wireless stations. The available settings are described below.
Selected Device
Region or
Domain
SSID
Channel No
This shows the name of the Print Server.
Select your region from the drop-down list.
•
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
•
To communicate, all Wireless stations MUST use the same
SSID/ESSID. Change this value, or change the other Wireless
stations, to ensure each Wireless station has the same value.
•
The default value is blank (null), so the Wireless station can join
any Ad-hoc group.
Note! The SSID is case sensitive.
The effect of this setting depends on the Network Type setting:
•
In Infrastructure mode, this setting has no effect. The Channel is
selected automatically, to match the Channel used by the Access
Point.
•
In Ad hoc mode, all Wireless stations MUST use the same
Channel number.
If you experience interference (shown by lost connections and/or slow
data transfers) you may need to experiment with different channels.
Page 49