5. Click Refresh to make sure if the printer has setup correct.
6. Click close to finish your Installation. Your installation is now completed.
•
To install additional Printers, repeat steps 4.
•
Use the Start menu to run this program in future. The default installation is Start >
Programs >TRENDnet > Print Server Utility > Printer Port Setup.
Note:
If using the Epson Spooler Manager, this program must be disabled, as follows:
1. Run the Epson Spooler Manager.
2. Select "Queue Setup" from the menu.
3. Click "Use Print Manager for this port".
4. Click "OK" to exit.
Management
•
Print jobs can be managed like any Windows printer. Open the Printers folder (Start>
Settings > Printers) and double-click any printer to see the current print jobs.
Page 28