TRENDnet TE100-P11 User Manual page 61

SNMP (Simple Network Management Protocol)
General
SysContact
SysLocation
Management Stations
Station No.
IP Address
Community
Access
Trap Receivers
Receiver No.
IP Address
Community
Enable with
Severity level
For more information about using SNMP, see Chapter 7 - Special Features.
Text Field - Name of the contact person.
Text Field - Location of the contact person.
Select the Management station (1..4), and click the Get Data button to
update the display for the selected item.
Enter the IP Address of the management station, which has the SNMP
program installed.
This is a text field. Enter the name of the community.
Select the desired level of access.
Select the Trap Receiver number (1..4), and click the Get Data button
to update the display for the selected item.
Enter the IP Address of the Trap Receiver, which will be sent the
Trap message.
This is a text field. Enter the name of the community.
Check to enable; select the severity level.
Note: Currently, all traps are level 1.
Page 58