TRENDnet TE100-P11 User Manual page 28

Windows 9x/ME Setup
Before performing the following procedure, the Print Server must be installed on your LAN,
and configured as described in Chapter 3. Both the Print Server and the attached printer should
be powered ON.
1. Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run Autorun.exe in the root folder.
2. On the first screen, shown below, click Install Utility and in the sub menu click on
Installation.
3. Follow the prompts installation.
4. When the following screen shows, click User to install the Print Port Setup Utility, then
click Next.
5. Follow to complete the installation (Refer to the Windows section of Chapter 8 -
Troubleshooting if there is a problem with the installation.)
6. The Print Port Setup will run.
Page 25