The Roll Is Empty; Roll Printing Is Selected, But Sheets Are Loaded - Canon imagePROGRAF iPF755 User Manual

Roll printing is selected, but sheets are loaded.

A print job for rolls was received when a sheet is
loaded.

The roll is empty.

The roll is empty.
There is remaining roll paper, but because it could
not be advanced, it could not be detected.
Cause
Cause
Corrective Action
Follow these steps to load and print on a roll.
1.
Press ▲ or ▼ to select Eject Cut Sheet, press
the OK button, and remove the sheet.
(→P.146)
2.
Load a new roll.
(→P.108)
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then
press the OK button.
Corrective Action
Follow these steps to replace the used roll with a new
roll of the same type and size.
1.
Press the Release Lever back and remove the roll.
(→P.118)
(→P.120)
2.
Load the new roll.
(→P.105)
(→P.108)
3.
If no barcode was printed on the roll, specify the
type of paper.
(→P.112)
4.
When you have selected ManageRemainRoll >
On in the control panel menu and a barcode is not
printed on the roll, also specify the paper length.
(→P.114)
5.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver.
(→P.189)
Messages regarding paper
Error Message 757