Eject (Waiting For Ink To Dry After Printing) - Canon imagePROGRAF iPF755 User Manual

Handling rolls

Eject (waiting for ink to dry after printing)

Important
•
When cutting wide printed documents after ejection, have two people support the documents. If the
paper drops, printed documents may be damaged.
•
Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect
the printing quality or cause rough cut edges.
1.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Paper tab (
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button. The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5.
Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6.
Press ▲ or ▼ to select Eject, and then press the OK button.
7.
Starts printing.
When printing is nished, the printer will stop without cutting.
8.
Holding the printed document to prevent it from dropping, press the Cut button to cut the roll.
132 Handling Paper
).