Canon imagePROGRAF iPF755 User Manual page 74

Control Panel
Interface Ethernet
Setup Driver
Interface Print
Return Defaults
System Sleep Timer
Setup
Buzzer
Contrast Adj.
Date &
Time
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
Paper
Size
Basis
58 Printer Parts
Setting Item
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Date
Time
Roll Selection 1
Roll Selection 2
Description, Instructions
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic conguration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to
the default values.
Specify the period before the printer enters sleep
mode.
Choose On for the buzzer to sound in case of errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date setting
is specied.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Choose the unit of measurement when roll length
is displayed. Change the unit displayed for the
remaining amount of roll paper.
Specify printing behavior if the type and size of paper
specied in the printer menu does not match the type
and size in the printer driver.
Choose Pause to have printing paused under these
circumstances. Choose Warning to continue printing
after notication. Choose None to continue printing
without notication. Choose Hold Job to store jobs
with mismatched types and sizes of paper on the
printer hard disk, in a print queue awaiting processing.
(→P.611)
If roll size detection is activated, choose whether ISO
A3 (297mm) or 300mm Roll is applied when a roll of
an intermediate width is detected.
If roll size detection is activated, choose whether
10in. (254mm) or JIS B4 (257mm) is applied when a
roll of an intermediate width is detected.