Page Options Dialog Box
This dialog box appears when you select "Page Options" from the "File" menu. This allows you to congure the roll
paper length, object layout order, and margins of Free Layout.
"Roll Paper Length"
Set the length of one page to print on roll paper.
The following settings are available for roll paper length.
Setting
"Auto Settings"
"Manual Settings"
Note
•
Available only if rolls are selected in Paper Source.
•
You can input between 203.2 and 18000.0(mm) (between 8.00 and 708.66(inch)).
•
You can change the numbers by clicking either "▲" button or "▼" button.
"Order"
Set the object layout order.
The following settings are available for order.
Setting
"Upper Left to Right"
"Upper Left to Bottom"
"Upper Right to Left"
"Lower Left to Top"
Note
•
When you have selected "Roll Paper Length" > "Auto Settings" and "Paper Orientation" > "Vertical", you
can choose "Upper Left to Right" or "Upper Right to Left".
•
When you have selected "Roll Paper Length" > "Auto Settings" and "Paper Orientation" > "Horizontal",
you can choose "Upper Left to Bottom" or "Lower Left to Top".
The one-page length to be printed on roll paper is automatically set so that
the laid-out objects are printed on one page.
You can input the length of one page to print on roll paper in numerical
characters.
The objects are laid out from upper left to right.
The objects are laid out from upper left to bottom.
The objects are laid out from upper right to left.
The objects are laid out from lower left to top.
Details
Details
Windows Software 399
Free Layout