Canon imagePROGRAF iPF755 User Manual page 698

Canon imageprograf ipf755: user guide
Hide thumbs Also See for imagePROGRAF iPF755:
Table of Contents

Advertisement

Adjusting the feed amount
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5.
Press ▲ or ▼ to select Feed Priority, and then press the OK button.
6.
Press ▲ or ▼ to select Adjust Length, and then press the OK button.
7.
Press ▲ or ▼ to select AdjustmentPrint or Change Settings, and then press the OK button.
When you select AdjustmentPrint, a test pattern is printed for you to measure the scale and
calculate the discrepancy. The scale bar shows "Millimeter" in 50 mm units and "Inch" in 1
inch units.
Note
A test pattern is printed in black when you choose A:High or in magenta if you choose
B:Standard/Draft.
To cancel printing the test pattern for adjustment, hold down the Stop button. When Stop printing?
is displayed, press ▲ or ▼ to select Yes, and then press the OK button.
8.
Press ▲ or ▼ to enter the amount of discrepancy, and then press the OK button.
If the scale is shorter than the actual size, use a positive setting value. If it is longer, use a
negative value.
The feed amount can be adjusted in 0.02% increments.
682 Adjustments for Better Print Quality

Advertisement

Table of Contents
loading

Table of Contents