Res�Z�Ng Or�G�Nals By Enter�Ng A Scal�Ng Value (Mac Os X) - Canon imagePROGRAF iPF755 User Manual

Printing enlargements or reductions
Resizing Originals by Entering a Scaling Value (Mac OS
X)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
•
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1.
This sets the
Note
•
The conguration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are congured by opening the
Page Attributes dialog box from Page Setup.
If it is not displayed, the settings are congured in the upper part of the printer driver displayed when
you select Print from the application software menu.
2.
Select the printer in the
3.
F
In the Paper Size list, click the size of the original. In this case, click ISO A4.
4.
If you congured the settings using the Page Attributes dialog box, click
dialog box, and then select Print from the application software menu.
218 Enhanced Printing Options
B C
Format for and
A
Printer list.
Paper Size.
F
OK to close the