Canon imagePROGRAF iPF755 User Manual page 451

Completing the scanning settings on the Color imageRUNNER.
Congure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned
originals to the hot folder if you assign the scanning settings and destination to a Favorites button on the
Color imageRUNNER.
For instructions on assigning scanning settings and destinations to a Favorites button, refer to the setting
manual, displayed by clicking Color imageRUNNER Enlargement Copy Setup Manual button of Color
imageRUNNER Enlargement Copy utility, or refer to the Color imageRUNNER manual.
Scanning the original and print an enlargement
Follow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer.
For detailed instructions, refer to the Color imageRUNNER manual.
1.
Load the original on the platen glass or document feeder of the Color imageRUNNER.
2.
Press Send to display the screen for transmission.
3.
Press Favorites, and then press the Favorites button assigned to the hot folder.
4.
Press Start on the control panel. If you scan originals on the platen glass, after scanning all
originals, press Done on the touch-panel display.
Scanned originals are sent to the hot folder and automatically enlarged and printed following the
conditions you specied for the folder.
Note
•
For details on Color imageRUNNER Enlargement Copy, refer to Color imageRUNNER Enlargement
Copy.
Color imageRUNNER Enlargement Copy
Windows Software 435