Cannot Load Sheets; Paper Is Not Cut Straight; Depression On The Leading Edge Is Left - Canon imagePROGRAF iPF755 User Manual

Roll Paper Cannot be Inserted into the Paper Feed Slot
The roll paper is warped.
Paper is jammed by the paper feed slot.

Cannot load sheets

The paper source selection is incorrect.

Paper is not cut straight

The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position before
it is cut.
You are using paper that cannot be cut with the
Cutter Unit.
Paper is not cut
In the printer driver, No or Print Cut Guideline is
specied in Auto Cut.
In the Control Panel menu, Cutting Mode is set to
Eject or Manual.

Depression on the leading edge is left

Keeping a roll in the printer for a long time without
printing on it may leave a depression on the leading
edge.
The size of clear lm cannot be detected
The Platen is soiled with ink or other substances.
Cause
Cause
Cause
Cause
Cause
Cause
Corrective Action
Straighten out curls and reload the roll.
Remove the jammed paper.
(→P.122)
(→P.147)
Corrective Action
Press the Load button and select the paper source.
Corrective Action
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Specify Manual in Cutting Mode in the Control
Panel menu and use scissors or a cutting tool to cut
the roll after printing.
(→P.131)
Corrective Action
Specify Yes in Auto Cut in the printer driver.
If the Cutting Mode is Eject, press the Cut button to
cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors
or the like.
Corrective Action
When printing quality is most important, we
recommend setting TrimEdge Reload to On or
Automatic so that the paper edge is automatically
cut before printing.
(→P.35)
Corrective Action
Open the Top Cover and clean the entire Platen.
(→P.709)
Problems Regarding Paper
Troubleshooting 727