Adjusting The Feed Amount - Canon imagePROGRAF iPF755 User Manual

Adjusting the feed amount

Adjusting the feed amount
Adjusting the Feed Amount
If printed documents are affected by the following problems, try adjusting the feed amount.
•
Banding in different colors
•
Line length is not accurate in the direction paper is fed
To adjust the feed amount, do the following, in this order.
1.
Depending on the issue, adjust Adj. Priority to suit the particular type of paper.
(→P.675)
2.
Execute Adj. Quality or Adjust Length, depending on the selection in Adj. Priority.
(→P.676)
(→P.678)
(→P.681)
3.
After executing Adj. Quality, execute Adj. Fine Feed for further adjustment as needed.
(→P.680)
674 Adjustments for Better Print Quality