Cannot print over a network
Cannot print over a NetWare network
The printer's NetWare settings are not congured
correctly.
The computer you are trying to print from is not
congured correctly.
The NetWare server and services are not congured
correctly.
Cannot print over AppleTalk or Bonjour networks
The AppleTalk protocol is not enabled on the printer.
The computer you are trying to print from is not
congured correctly.
The computer and printer are not on the same
network.
742 Troubleshooting
Cause
Cause
Corrective Action
Make sure the printer's NetWare settings are
congured correctly. In particular, make sure a valid
frame type is selected.
(→P.577)
Make sure the computer's NetWare settings are
congured correctly.
(→P.595)
Check the following points.
1.
Make sure the NetWare le server is running.
2.
Make sure there is enough free disk space on the
NetWare le server. Insufcient disk space may
prevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and conrm that
the print service is congured correctly and the
print queue is available.
4.
If data transmission to a printer on another subnet
fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify
"Other/Unknown" as the printer type.
Corrective Action
Activate AppleTalk on the printer.
(→P.576)
Make sure the computer's AppleTalk settings are
congured correctly.
(→P.600)
(→P.604)
Due to the nature of Bonjour, you cannot print if
the printer is on another network behind a router.
Make sure the computer and printer are on the same
network. For information about network settings, ask
your network administrator.