Canon imagePROGRAF iPF755 User Manual page 261

Borderless Printing by Resizing Originals to Fit the Roll
Width (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the
following example.
•
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
1.
B
This sets the
Note
•
The conguration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are congured by opening the
Page Attributes dialog box from Page Setup.
If it is not displayed, the settings are congured in the upper part of the printer driver displayed when
you select Print from the application software menu.
2.
Select the printer in the
3.
F
In the Paper Size list, click the size of the original. In this case, click ISO A4.
Note
•
All sizes are available in borderless printing if you resize originals to t the roll width.
4.
If you congured the settings using the Page Attributes dialog box, click
dialog box, and then select Print from the application software menu.
C
Format for and Paper Size.
A
Printer list.
Borderless Printing
F
OK to close the
Enhanced Printing Options 245