Turning The Printer On And Off; Turning The Printer On - Canon imagePROGRAF iPF755 User Manual

Canon imageprograf ipf755: user guide
Hide thumbs Also See for imagePROGRAF iPF755:
Table of Contents

Advertisement

Control Panel

Turning the Printer On and Off

Turning the printer on

1.
Press the Power button to turn on the printer.
The printer will now start up.
After the Display Screen shows the Canon logo, Starting up... Please wait. is displayed.
2.
The Power Lamp is lit when the printer nishes starting up, and the printer is now in Standby.
The printer will not go into Standby in the following situations. Take the appropriate action.
The Top Cover is open
Close the Top Cover.
The Ink Tank Cover is open
Close the Ink Tank Cover.
The Printhead is not installed
see "Replacing the Printhead". (→P.695)
An Ink Tank is not installed
see "Replacing Ink Tanks". (→P.685)
If "ERROR" is shown on the Display Screen
(See "Error messages.")
The Power Lamp and Message Lamp are not lit (even once), and nothing appears on the Display
Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.
No paper is loaded
Load paper. (→P.80) (→P.83)
Important
Starting the printer when it is connected via the USB cable to a Macintosh computer that is off may
cause the computer to start up at the same time. To prevent this, disconnect the USB cable before
starting the printer. Connecting the printer to the computer via a USB hub may solve this issue.
24 Printer Parts

Advertisement

Table of Contents
loading

Table of Contents