Canon imagePROGRAF iPF755 User Manual page 236

Printing enlargements or reductions
11.
Make sure the width of the loaded roll is displayed in the
A2/A3 (420.0mm).
Note
•
If the width of the roll loaded in the printer is not shown in
on the Main pane to update the printer information.
12.
Make sure the
Page Attributes dialog box-in this case, ISO A4.
13.
Select the
14.
G
Click Scaling and enter "120".
Note
•
You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
•
If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner. In this case, you can center originals by selecting the
check box.
15.
Conrm the print settings, and then click
Note
•
For tips on conrming print settings, see "Conrming Print Settings (Mac OS X)". (→P.459)
220 Enhanced Printing Options
C
Page Size setting matches the original size as selected in
D
Enlarged/Reduced Printing check box.
B
Roll Width list-in this case, ISO
B
Roll Width, click
M
Print to start printing.
L
Printer Information
C
Paper Size in the
J
Print Centered