Loading Documents In The Adf (Auto Document Feeder) - Canon MX450 Series Online Manual

Loading Documents in the ADF (Auto Document Feeder)

You can load documents to copy, fax, or scan in the ADF (Auto Document Feeder).
Note
To scan a document at optimum quality, load it on the platen glass.
1. Make sure that any original has been removed from the platen glass.
2. Load a document in the ADF.
(1) Open the document tray.
(2) Insert the document in the document tray until you hear a beep sound.
Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.
Originals You Can Load
Note
When you set the alarm to be silent in Sound control of Dev. user settings, the alarm will not beep even
if the document is inserted in the document tray.
Dev. user settings
(3) Adjust the document guides to match the width of the document.
Do not slide the document guides too hard against the document. The document may not be fed properly.
61