Other Included Accessories - Brother PE-400D Operation Manual

OTHER INCLUDED ACCESSORIES

1 2
4 5
7 8
10 11
13 14
16 17
Note
This method keeps the thread from twisting as it comes off the spool pin.
** Net
If using special threads which wind quickly off the thread spool, attach a net to the spool before using.
: Cut the net to match the size of the spool.
1 Net
2 Thread spool
3 Spool pin
4 Spool cap
If using metallic thread, we recommend that you
use a 90/14 home sewing machine needle.
Note (For U.S.A. only)
Foot controller : Model N5V
This foot controller can be used for sewing machine model PE-300S/PE-400D.
3
6
9
12
* Extra spool pin and spool felt
Use when embroidering with metallic thread.
1. Insert the extra spool pin into the end of the
15
2. Install the spool felt and the thread spool in that
1 Insert the extra spool
2 Spool felt
18
3 Thread spool
No. Part Name
1 Blind stitch foot "R"
2 Zipper foot "I"
3 Button sew-on foot
4 Extra spool pin *
5 Cleaning brush
6 Scissors
7 Embroidery foot "Q"
8 Key
9 Owner's Manual
10 Hard case/Extension table
11 Embroidery Unit Cover
12 Embroidery unit
13 Embroidery frame set
(Regular)
14 Backing material (Stabilizer material)
15 Net **
16 Foot controller
17 Embroidery bobbin thread
18 Spool felt*
bobbin winder shaft.
order, and then thread the upper thread.
pin into the end of the
bobbin winder shaft
* When setting the
thread spool, set it
so that the thread
winds off from the
front of the spool.
* If using metallic thread, we recommend that
you use a 90/14 home sewing machine nee-
dle.
1
3
2
Part Code
X56409-001
103561-002
X59375-051
XA3336-051
X59476-051
184783-001
XA5357-001
XA2005-051
—
—
—
—
SA432 (USA)
XA6628-002 (Others)
—
XA5523-050
XC1154-051
SABTS (USA)
X81164-001 (Others)
X57045-051
3
2
1
4
4
7