Table of Contents
Advertisement
1. Red Power Switch and Green Heater & Compressor Switch won't light
2. Red Power Switch and Green Heater & Compressor Switch is lit but the Status LED lights
on the Front are not lit
3. Compressor Runs but does Not Chill
4. Compressor is Not Running
Red Power Switch and Green Heater & Compressor Switch won't light
Possible Reason
Circuit Breaker
Fuse is Blown
Defective / Loose Power Cord
Failed Socket - Power Line
Noise Filter, Electro-Magnetic
Interference filter (EMI)
Defective Red Power Switch
Defective Green Heater &
Compressor Switch
WL3 FW Manual
POWER TROUBLESHOOTING INDEX
Check the Circuit Breaker
Replace Fuse. Use 10 amp Fuse
Check that Power Cord is properly plugged in. If it is properly
plugged in, use a different power cord to verify. Use only
Waterlogic supplied power cord.
Replace Socket - Power Line Noise Filter, Electro-Magnetic
Interference filter (EMI)
Replace Red Power Switch
Replace Green Heater & Compressor Switch
Solution
Page 43 - Revision: EU 17-09-2020
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the WL3FW FIREWALL and is the answer not in the manual?
Questions and answers