Table of Contents
Advertisement
For demonstrative purposes, photos below have lowered the Hot Tank from the WL3FW
Water Treatment System.
Press the reset button
6.
Reattach the Protective Metal Box by depressing the top
7.
flap of the Protective Metal Box so it snaps back into its
original position on the hot tank.
8.
Replace the Lower Front Panel.
9.
Plug in the Power Cord.
Turn on the Green Compressor/Heater Switch I=ON position
10.
The Hot and Cold tanks must be filled with water BEFORE turning on the Green Heater
and Compressor Switch.
11.
Verify the cooler is fully operational before installing it at the customers' site.
WL3 FW Manual
Page 60 - Revision: EU 17-09-2020
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the WL3FW FIREWALL and is the answer not in the manual?
Questions and answers