Table of Contents
Advertisement
Dispensing Won't Stop When Not Holding the Dispensing Button
Possible Reason
Bad Display PCB
Debris in the Solenoid
Damaged or Faulty Solenoid
Steady Drip Out of Faucet
Possible Reason
Debris in Solenoid
Hot Water or Steam Coming out of both the Faucet and Vent Hole
Possible Reason
Improper tubing attachment
from the Hot Tank to Faucet or
vice versa.
WL3 FW Manual
Replace Main PCB
Inspect Solenoid for debris and clean out as needed.
Replace Solenoid.
Inspect Solenoid for debris and clean out as needed.
Check that the tubing is connected from Hot Tank Outlets to
correct Faucet attachments. Connect tubing to outlets as
needed.
Solution
Solution
Solution
Page 48 - Revision: EU 17-09-2020
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the WL3FW FIREWALL and is the answer not in the manual?
Questions and answers