Reset Service - NSD ABSOCODER NCW-3DNIPLW Specifications & Instruction Manual

11-6. Reset Service

The state of NCW-3DNIP (slave) can be reset by using a configuration tools or EtherNet/IP scanner (master) if
EhterNet/IP communication is available.
Use Reset (ID: 0x05) in an Instance Service (InstanceID: 0x01) of the Identity object (ClassID: 0x01), and the
device can be reset.
The following parameter can be specified when resetting.
Parameter
0 Restart
All NCW-3DNIP parameters' setting is redesignated to initial values (factory setting), and
1
restart.
All NCW-3DNIP parameters' setting is redesignated to initial values (factory setting) except
2
communication LINK parameter, and restart.
Description
84