Cleaning; Daily Cleaning - RoboLabs RC800MD Instruction Manual

5

Cleaning

ALWAYS unplug before cleaning.
•
• DO NOT use excessive water or water jet for machine cleaning. DO NOT spill water on electric
panels or parts. Using excessive water during cleaning can cause short circuit and electric
shock.
• DO NOT immerse machine and/or supply cord into water.
• DO NOT keep supply cord on the floor.
• Some surfaces are hot. Touching hot surfaces might cause burn. ALWAYS wait until cooled
down before cleaning.
• Front panel and conveyor are heavy. DO NOT remove the panel or conveyor alone to avoid
injuries, or machine damage.
DO NOT use sharp items, or abrasives while cleaning.
•
The purpose of maintenance and cleaning is to keep machine in good condition during all the
lifetime and to meet safety requirements.
5.1

Daily cleaning

1. Unplug the machine. Inspect supply cord, cable plug, and wall receptacle for any
damages. In case of found damages DO NOT use the machine until damaged parts
replaced.
2. Remove any food from the machine.
3. Remove crumb trays, clean them from debris, wash with mild soap, rinse with water, let
it dry.
4. Wipe outer surfaces of the machine with a clean cloth damped in mild soap. Remove
soap residues with a cloth dampened with water; let it dry.
• ALWAYS use personal protective equipment: safety goggles, gloves,
apron.
17